EA2RCF LoRa APRS MAP Backup

My position About Go to MAIN map Powered by EA2RCF Radioclub Foronda ☰

reset

SP9WJ-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SP9WJ-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	current*	temp*	humidity*	v batt*	v cpu*
1771562723	0.88 mA	16 C	46 %	1.58 V	3.62 V
1771553480	0.8 mA	17 C	48 %	1.58 V	3.62 V
1771551630	0.88 mA	17 C	47 %	1.58 V	3.62 V
1771547007	0.77 mA	17 C	51 %	1.58 V	3.62 V
1771544234	0.8 mA	17 C	44 %	1.58 V	3.62 V
1771542384	0.88 mA	17 C	45 %	1.58 V	3.62 V
1771536835	0.94 mA	18 C	45 %	1.6 V	3.62 V
1771534986	0.77 mA	18 C	41 %	1.6 V	3.62 V
1771519264	1.18 mA	18 C	48 %	1.6 V	3.62 V
1771518338	0.94 mA	18 C	43 %	1.6 V	3.62 V
1771517413	1.07 mA	18 C	41 %	1.6 V	3.62 V
1771508159	0.88 mA	19 C	39 %	1.62 V	3.62 V
1771505383	0.69 mA	19 C	39 %	1.62 V	3.62 V
1771504457	0.72 mA	19 C	39 %	1.62 V	3.62 V
1771503532	0.77 mA	19 C	39 %	1.62 V	3.62 V
1771498909	0.85 mA	19 C	39 %	1.62 V	3.62 V
1771497980	0.82 mA	19 C	39 %	1.62 V	3.62 V
1771495204	0.8 mA	19 C	39 %	1.62 V	3.62 V
1771493360	0.72 mA	18 C	40 %	1.6 V	3.61 V
1771493354	0.72 mA	18 C	40 %	1.6 V	3.61 V
1771490665	1.76 mA	18 C	41 %	1.6 V	3.61 V
1771490579	0.99 mA	18 C	42 %	1.6 V	3.61 V
1771489739	2.17 mA	18 C	42 %	1.6 V	3.61 V
1771489654	0.94 mA	18 C	42 %	1.6 V	3.61 V
1771488814	1.9 mA	18 C	43 %	1.6 V	3.62 V

*Used Equation Coefficients:

current: 0, 0.01569, 0

temp: 0, 1, -128

humidity: 0, 1, 0

v batt: 0, 0.02353, 0

v cpu: 0, 0.01569, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)