This is the latest recevied telemetry packets stored in our database for station/object SP6OOL-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1762825053 | 240 Count | 797 Count | 0 Count | 4.27 VDC | 0 VDC |
| 1762824153 | 239 Count | 794 Count | 0 Count | 4.34 VDC | 0 VDC |
| 1762823253 | 238 Count | 792 Count | 0 Count | 4.6 VDC | 0 VDC |
| 1762822363 | 237 Count | 789 Count | 0 Count | 4.2 VDC | 0 VDC |
| 1762821463 | 236 Count | 788 Count | 0 Count | 4.75 VDC | 0 VDC |
| 1762820562 | 235 Count | 786 Count | 0 Count | 4.24 VDC | 0 VDC |
| 1762819661 | 234 Count | 785 Count | 0 Count | 4.38 VDC | 0 VDC |
| 1762818761 | 233 Count | 782 Count | 0 Count | 4.47 VDC | 0 VDC |
| 1762817860 | 232 Count | 780 Count | 0 Count | 4.21 VDC | 0 VDC |
| 1762816960 | 231 Count | 778 Count | 0 Count | 4.31 VDC | 0 VDC |
| 1762816059 | 230 Count | 776 Count | 0 Count | 4.42 VDC | 0 VDC |
| 1762815158 | 229 Count | 773 Count | 0 Count | 4.36 VDC | 0 VDC |
| 1762814258 | 228 Count | 772 Count | 0 Count | 4.54 VDC | 0 VDC |
| 1762813357 | 227 Count | 770 Count | 0 Count | 4.22 VDC | 0 VDC |
| 1762812456 | 226 Count | 768 Count | 0 Count | 4.61 VDC | 0 VDC |
| 1762811556 | 225 Count | 766 Count | 0 Count | 4.66 VDC | 0 VDC |
| 1762810655 | 224 Count | 765 Count | 0 Count | 4.54 VDC | 0 VDC |
| 1762809754 | 223 Count | 764 Count | 0 Count | 4.11 VDC | 0 VDC |
| 1762808854 | 222 Count | 764 Count | 0 Count | 4.26 VDC | 0 VDC |
| 1762807953 | 221 Count | 763 Count | 0 Count | 4.21 VDC | 0 VDC |
| 1762807052 | 220 Count | 763 Count | 0 Count | 4.34 VDC | 0 VDC |
| 1762806152 | 219 Count | 762 Count | 0 Count | 4.24 VDC | 0 VDC |
| 1762805251 | 218 Count | 762 Count | 0 Count | 4.66 VDC | 0 VDC |
| 1762804350 | 217 Count | 761 Count | 0 Count | 4.64 VDC | 0 VDC |
| 1762803450 | 216 Count | 761 Count | 0 Count | 4.24 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)