This is the latest recevied telemetry packets stored in our database for station/object DF7RW-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1787567526 | 4.27 VDC | 14.68 VDC | 0 | 0 | 0 |
| 1787563926 | 4.24 VDC | 14.68 VDC | 0 | 0 | 0 |
| 1787560326 | 4.23 VDC | 14.68 VDC | 0 | 0 | 0 |
| 1787556726 | 4.26 VDC | 13.64 VDC | 0 | 0 | 0 |
| 1787553126 | 4.19 VDC | 13.74 VDC | 0 | 0 | 0 |
| 1787549526 | 4.23 VDC | 13.1 VDC | 0 | 0 | 0 |
| 1787545926 | 4.22 VDC | 12.98 VDC | 0 | 0 | 0 |
| 1787542325 | 4.19 VDC | 13.02 VDC | 0 | 0 | 0 |
| 1787538725 | 4.22 VDC | 13.06 VDC | 0 | 0 | 0 |
| 1787535125 | 4.19 VDC | 11.88 VDC | 0 | 0 | 0 |
| 1787531525 | 4.2 VDC | 13.12 VDC | 0 | 0 | 0 |
| 1787527925 | 4.19 VDC | 13.16 VDC | 0 | 0 | 0 |
| 1787524325 | 4.21 VDC | 13.18 VDC | 0 | 0 | 0 |
| 1787520725 | 4.27 VDC | 13.2 VDC | 0 | 0 | 0 |
| 1787517125 | 4.21 VDC | 13.22 VDC | 0 | 0 | 0 |
| 1787513524 | 4.23 VDC | 13.22 VDC | 0 | 0 | 0 |
| 1787509924 | 4.24 VDC | 13.24 VDC | 0 | 0 | 0 |
| 1787506324 | 4.2 VDC | 14.12 VDC | 0 | 0 | 0 |
| 1787502724 | 4.25 VDC | 14.68 VDC | 0 | 0 | 0 |
| 1787499124 | 4.26 VDC | 14.68 VDC | 0 | 0 | 0 |
| 1787495524 | 4.26 VDC | 14.68 VDC | 0 | 0 | 0 |
| 1787491924 | 4.19 VDC | 14.68 VDC | 0 | 0 | 0 |
| 1787488324 | 4.23 VDC | 14.68 VDC | 0 | 0 | 0 |
| 1787484724 | 4.25 VDC | 14.68 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)