This is the latest recevied telemetry packets stored in our database for station/object EB1BCG-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1775499435 | 3.88 VDC | 0 | 0 | 0 | 0 |
| 1775497635 | 3.87 VDC | 0 | 0 | 0 | 0 |
| 1775495833 | 3.88 VDC | 0 | 0 | 0 | 0 |
| 1775494036 | 3.88 VDC | 0 | 0 | 0 | 0 |
| 1775492236 | 3.87 VDC | 0 | 0 | 0 | 0 |
| 1775490436 | 3.88 VDC | 0 | 0 | 0 | 0 |
| 1775488635 | 3.88 VDC | 0 | 0 | 0 | 0 |
| 1775486835 | 3.88 VDC | 0 | 0 | 0 | 0 |
| 1775485035 | 3.87 VDC | 0 | 0 | 0 | 0 |
| 1775483235 | 3.88 VDC | 0 | 0 | 0 | 0 |
| 1775481435 | 3.88 VDC | 0 | 0 | 0 | 0 |
| 1775479634 | 3.88 VDC | 0 | 0 | 0 | 0 |
| 1775477834 | 3.88 VDC | 0 | 0 | 0 | 0 |
| 1775476034 | 3.87 VDC | 0 | 0 | 0 | 0 |
| 1775474233 | 3.87 VDC | 0 | 0 | 0 | 0 |
| 1775472436 | 3.87 VDC | 0 | 0 | 0 | 0 |
| 1775470635 | 3.88 VDC | 0 | 0 | 0 | 0 |
| 1775468835 | 3.86 VDC | 0 | 0 | 0 | 0 |
| 1775467035 | 3.84 VDC | 0 | 0 | 0 | 0 |
| 1775465235 | 3.87 VDC | 0 | 0 | 0 | 0 |
| 1775463435 | 3.88 VDC | 0 | 0 | 0 | 0 |
| 1775461634 | 3.87 VDC | 0 | 0 | 0 | 0 |
| 1775459834 | 3.87 VDC | 0 | 0 | 0 | 0 |
| 1775458034 | 3.87 VDC | 0 | 0 | 0 | 0 |
| 1775456234 | 3.88 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)