This is the latest recevied telemetry packets stored in our database for station/object XE2J-21. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Voltage* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1779408176 | 3.66 VDC | 0 | 0 | 0 | 0 |
| 1779408152 | 3.66 VDC | 0 | 0 | 0 | 0 |
| 1779408137 | 3.66 VDC | 0 | 0 | 0 | 0 |
| 1779408064 | 3.68 VDC | 0 | 0 | 0 | 0 |
| 1779408049 | 3.68 VDC | 0 | 0 | 0 | 0 |
| 1779407974 | 3.64 VDC | 0 | 0 | 0 | 0 |
| 1779407916 | 3.66 VDC | 0 | 0 | 0 | 0 |
| 1779407901 | 3.66 VDC | 0 | 0 | 0 | 0 |
| 1779407883 | 3.62 VDC | 0 | 0 | 0 | 0 |
| 1779407853 | 3.62 VDC | 0 | 0 | 0 | 0 |
| 1779407828 | 3.65 VDC | 0 | 0 | 0 | 0 |
| 1779407814 | 3.65 VDC | 0 | 0 | 0 | 0 |
| 1779407756 | 3.64 VDC | 0 | 0 | 0 | 0 |
| 1779407741 | 3.64 VDC | 0 | 0 | 0 | 0 |
| 1779407726 | 3.64 VDC | 0 | 0 | 0 | 0 |
| 1779407711 | 3.65 VDC | 0 | 0 | 0 | 0 |
| 1779407685 | 3.65 VDC | 0 | 0 | 0 | 0 |
| 1779407655 | 3.65 VDC | 0 | 0 | 0 | 0 |
| 1779407577 | 3.68 VDC | 0 | 0 | 0 | 0 |
| 1779407558 | 3.68 VDC | 0 | 0 | 0 | 0 |
| 1779407412 | 3.61 VDC | 0 | 0 | 0 | 0 |
| 1779407391 | 3.61 VDC | 0 | 0 | 0 | 0 |
| 1779407376 | 3.61 VDC | 0 | 0 | 0 | 0 |
| 1779407361 | 3.61 VDC | 0 | 0 | 0 | 0 |
| 1779407298 | 3.55 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
Voltage: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)