This is the latest recevied telemetry packets stored in our database for station/object IW2EJH-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1762808919 | 4 VDC | 1.04 VDC | 0 | 0 | 0 |
| 1762807119 | 4.01 VDC | 1.08 VDC | 0 | 0 | 0 |
| 1762805319 | 3.97 VDC | 0.74 VDC | 0 | 0 | 0 |
| 1762803518 | 4.02 VDC | 1.06 VDC | 0 | 0 | 0 |
| 1762801718 | 3.98 VDC | 0.86 VDC | 0 | 0 | 0 |
| 1762799918 | 4.04 VDC | 1.04 VDC | 0 | 0 | 0 |
| 1762798118 | 4.03 VDC | 0.9 VDC | 0 | 0 | 0 |
| 1762796318 | 4.05 VDC | 1.04 VDC | 0 | 0 | 0 |
| 1762794518 | 4.06 VDC | 1.08 VDC | 0 | 0 | 0 |
| 1762792718 | 4.07 VDC | 1.02 VDC | 0 | 0 | 0 |
| 1762790918 | 4.08 VDC | 1.02 VDC | 0 | 0 | 0 |
| 1762789118 | 4.09 VDC | 1.28 VDC | 0 | 0 | 0 |
| 1762787318 | 4.1 VDC | 1.9 VDC | 0 | 0 | 0 |
| 1762785517 | 4.11 VDC | 2.92 VDC | 0 | 0 | 0 |
| 1762783717 | 4.11 VDC | 2.06 VDC | 0 | 0 | 0 |
| 1762781917 | 4.13 VDC | 2.52 VDC | 0 | 0 | 0 |
| 1762780117 | 4.19 VDC | 4.2 VDC | 0 | 0 | 0 |
| 1762778317 | 4.21 VDC | 3.76 VDC | 0 | 0 | 0 |
| 1762776517 | 4.21 VDC | 4.28 VDC | 0 | 0 | 0 |
| 1762774717 | 4.17 VDC | 3.2 VDC | 0 | 0 | 0 |
| 1762772917 | 4.19 VDC | 2 VDC | 0 | 0 | 0 |
| 1762771117 | 4.17 VDC | 3.28 VDC | 0 | 0 | 0 |
| 1762769316 | 4.11 VDC | 1.1 VDC | 0 | 0 | 0 |
| 1762767516 | 4.14 VDC | 1.36 VDC | 0 | 0 | 0 |
| 1762765716 | 4.05 VDC | 1.84 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)