This is the latest recevied telemetry packets stored in our database for station/object SQ2PDS-0. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1795359041 | 40 Count | 176 Count | 31 Count | 0 VDC | 0 VDC |
| 1795357240 | 35 Count | 144 Count | 27 Count | 0 VDC | 0 VDC |
| 1795355439 | 32 Count | 121 Count | 25 Count | 0 VDC | 0 VDC |
| 1795353638 | 29 Count | 100 Count | 23 Count | 0 VDC | 0 VDC |
| 1795346444 | 218 Count | 988 Count | 167 Count | 0 VDC | 0 VDC |
| 1795344643 | 210 Count | 949 Count | 160 Count | 0 VDC | 0 VDC |
| 1795342842 | 204 Count | 918 Count | 155 Count | 0 VDC | 0 VDC |
| 1795341041 | 201 Count | 897 Count | 153 Count | 0 VDC | 0 VDC |
| 1795339240 | 195 Count | 873 Count | 148 Count | 0 VDC | 0 VDC |
| 1795337439 | 191 Count | 852 Count | 145 Count | 0 VDC | 0 VDC |
| 1795335639 | 186 Count | 822 Count | 141 Count | 0 VDC | 0 VDC |
| 1795333838 | 182 Count | 802 Count | 138 Count | 0 VDC | 0 VDC |
| 1795332037 | 177 Count | 780 Count | 134 Count | 0 VDC | 0 VDC |
| 1795330236 | 172 Count | 758 Count | 130 Count | 0 VDC | 0 VDC |
| 1795326642 | 154 Count | 708 Count | 118 Count | 0 VDC | 0 VDC |
| 1795324841 | 149 Count | 684 Count | 114 Count | 0 VDC | 0 VDC |
| 1795323040 | 145 Count | 657 Count | 111 Count | 0 VDC | 0 VDC |
| 1795321239 | 141 Count | 630 Count | 108 Count | 0 VDC | 0 VDC |
| 1795319438 | 136 Count | 606 Count | 104 Count | 0 VDC | 0 VDC |
| 1795317638 | 132 Count | 581 Count | 101 Count | 0 VDC | 0 VDC |
| 1795315837 | 127 Count | 557 Count | 97 Count | 0 VDC | 0 VDC |
| 1795314036 | 123 Count | 528 Count | 94 Count | 0 VDC | 0 VDC |
| 1795312235 | 119 Count | 509 Count | 91 Count | 0 VDC | 0 VDC |
| 1795310434 | 115 Count | 486 Count | 88 Count | 0 VDC | 0 VDC |
| 1795308633 | 111 Count | 465 Count | 85 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)