This is the latest recevied telemetry packets stored in our database for station/object SR2LAS-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1795360910 | 21 Count | 47 Count | 21 Count | 0 VDC | 0 VDC |
| 1795359109 | 542 Count | 1036 Count | 511 Count | 0 VDC | 0 VDC |
| 1795357307 | 511 Count | 990 Count | 481 Count | 0 VDC | 0 VDC |
| 1795355506 | 487 Count | 946 Count | 458 Count | 0 VDC | 0 VDC |
| 1795353704 | 465 Count | 908 Count | 437 Count | 0 VDC | 0 VDC |
| 1795351902 | 435 Count | 860 Count | 408 Count | 0 VDC | 0 VDC |
| 1795350101 | 398 Count | 802 Count | 372 Count | 0 VDC | 0 VDC |
| 1795348317 | 365 Count | 753 Count | 344 Count | 0 VDC | 0 VDC |
| 1795346516 | 342 Count | 703 Count | 322 Count | 0 VDC | 0 VDC |
| 1795344714 | 305 Count | 632 Count | 289 Count | 0 VDC | 0 VDC |
| 1795342912 | 276 Count | 575 Count | 261 Count | 0 VDC | 0 VDC |
| 1795341111 | 257 Count | 534 Count | 243 Count | 0 VDC | 0 VDC |
| 1795339309 | 236 Count | 484 Count | 223 Count | 0 VDC | 0 VDC |
| 1795337508 | 217 Count | 438 Count | 205 Count | 0 VDC | 0 VDC |
| 1795335706 | 186 Count | 381 Count | 175 Count | 0 VDC | 0 VDC |
| 1795333905 | 168 Count | 335 Count | 158 Count | 0 VDC | 0 VDC |
| 1795332103 | 147 Count | 288 Count | 138 Count | 0 VDC | 0 VDC |
| 1795330301 | 128 Count | 242 Count | 120 Count | 0 VDC | 0 VDC |
| 1795328500 | 103 Count | 192 Count | 96 Count | 0 VDC | 0 VDC |
| 1795326716 | 74 Count | 141 Count | 72 Count | 0 VDC | 0 VDC |
| 1795324915 | 50 Count | 97 Count | 49 Count | 0 VDC | 0 VDC |
| 1795323113 | 25 Count | 49 Count | 25 Count | 0 VDC | 0 VDC |
| 1795321311 | 496 Count | 1046 Count | 468 Count | 0 VDC | 0 VDC |
| 1795319510 | 472 Count | 998 Count | 445 Count | 0 VDC | 0 VDC |
| 1795317708 | 450 Count | 952 Count | 424 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)