This is the latest recevied telemetry packets stored in our database for station/object IZ1RFL-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1795358417 | 0 Count | 223 Count | 0 Count | 4.27 VDC | 0 VDC |
| 1795357517 | 0 Count | 223 Count | 0 Count | 4.28 VDC | 0 VDC |
| 1795356617 | 0 Count | 221 Count | 0 Count | 4.23 VDC | 0 VDC |
| 1795355717 | 0 Count | 217 Count | 0 Count | 4.25 VDC | 0 VDC |
| 1795354817 | 0 Count | 214 Count | 0 Count | 4.28 VDC | 0 VDC |
| 1795353917 | 0 Count | 213 Count | 0 Count | 4.25 VDC | 0 VDC |
| 1795353016 | 0 Count | 206 Count | 0 Count | 4.27 VDC | 0 VDC |
| 1795352116 | 0 Count | 196 Count | 0 Count | 4.27 VDC | 0 VDC |
| 1795351216 | 0 Count | 194 Count | 0 Count | 4.23 VDC | 0 VDC |
| 1795349416 | 0 Count | 176 Count | 0 Count | 4.23 VDC | 0 VDC |
| 1795348516 | 0 Count | 171 Count | 0 Count | 4.26 VDC | 0 VDC |
| 1795347616 | 0 Count | 167 Count | 0 Count | 4.23 VDC | 0 VDC |
| 1795346716 | 0 Count | 161 Count | 0 Count | 4.25 VDC | 0 VDC |
| 1795345816 | 0 Count | 158 Count | 0 Count | 4.27 VDC | 0 VDC |
| 1795344916 | 0 Count | 152 Count | 0 Count | 4.22 VDC | 0 VDC |
| 1795344015 | 0 Count | 149 Count | 0 Count | 4.26 VDC | 0 VDC |
| 1795343115 | 0 Count | 146 Count | 0 Count | 4.26 VDC | 0 VDC |
| 1795342215 | 0 Count | 131 Count | 0 Count | 4.24 VDC | 0 VDC |
| 1795341315 | 0 Count | 122 Count | 0 Count | 4.23 VDC | 0 VDC |
| 1795340415 | 0 Count | 110 Count | 0 Count | 4.24 VDC | 0 VDC |
| 1795339515 | 0 Count | 106 Count | 0 Count | 4.28 VDC | 0 VDC |
| 1795338615 | 0 Count | 101 Count | 0 Count | 4.28 VDC | 0 VDC |
| 1795337715 | 0 Count | 94 Count | 0 Count | 4.25 VDC | 0 VDC |
| 1795335014 | 0 Count | 71 Count | 0 Count | 4.23 VDC | 0 VDC |
| 1795334114 | 0 Count | 63 Count | 0 Count | 4.26 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)