This is the latest recevied telemetry packets stored in our database for station/object EA8DEC-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Voltage* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1791449127 | 4.26 VDC | 0 | 0 | 0 | 0 |
| 1791448227 | 4.25 VDC | 0 | 0 | 0 | 0 |
| 1791447326 | 4.25 VDC | 0 | 0 | 0 | 0 |
| 1791446428 | 4.24 VDC | 0 | 0 | 0 | 0 |
| 1791445526 | 4.23 VDC | 0 | 0 | 0 | 0 |
| 1791444627 | 4.23 VDC | 0 | 0 | 0 | 0 |
| 1791443727 | 4.22 VDC | 0 | 0 | 0 | 0 |
| 1791442827 | 4.22 VDC | 0 | 0 | 0 | 0 |
| 1791441927 | 4.22 VDC | 0 | 0 | 0 | 0 |
| 1791441027 | 4.22 VDC | 0 | 0 | 0 | 0 |
| 1791440127 | 4.22 VDC | 0 | 0 | 0 | 0 |
| 1791439227 | 4.22 VDC | 0 | 0 | 0 | 0 |
| 1791438328 | 4.22 VDC | 0 | 0 | 0 | 0 |
| 1791437428 | 4.23 VDC | 0 | 0 | 0 | 0 |
| 1791436528 | 4.23 VDC | 0 | 0 | 0 | 0 |
| 1791435628 | 4.23 VDC | 0 | 0 | 0 | 0 |
| 1791434727 | 4.23 VDC | 0 | 0 | 0 | 0 |
| 1791433828 | 4.23 VDC | 0 | 0 | 0 | 0 |
| 1791432928 | 4.23 VDC | 0 | 0 | 0 | 0 |
| 1791432028 | 4.23 VDC | 0 | 0 | 0 | 0 |
| 1791431128 | 4.24 VDC | 0 | 0 | 0 | 0 |
| 1791430228 | 4.23 VDC | 0 | 0 | 0 | 0 |
| 1791429328 | 4.24 VDC | 0 | 0 | 0 | 0 |
| 1791428427 | 4.24 VDC | 0 | 0 | 0 | 0 |
| 1791427528 | 4.24 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
Voltage: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)