This is the latest recevied telemetry packets stored in our database for station/object SV5BYP-16. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Bat* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1779556114 | 3.4 | 0 | 0 | 0 | 0 |
| 1779555211 | 3.55 | 0 | 0 | 0 | 0 |
| 1779554307 | 3.65 | 0 | 0 | 0 | 0 |
| 1779553404 | 3.71 | 0 | 0 | 0 | 0 |
| 1779552501 | 3.74 | 0 | 0 | 0 | 0 |
| 1779551598 | 3.75 | 0 | 0 | 0 | 0 |
| 1779550695 | 3.76 | 0 | 0 | 0 | 0 |
| 1779550571 | 3.76 | 0 | 0 | 0 | 0 |
| 1779550531 | 3.76 | 0 | 0 | 0 | 0 |
| 1779550507 | 3.76 | 0 | 0 | 0 | 0 |
| 1779550198 | 3.76 | 0 | 0 | 0 | 0 |
| 1779549294 | 3.77 | 0 | 0 | 0 | 0 |
| 1779548391 | 3.78 | 0 | 0 | 0 | 0 |
| 1779547488 | 3.8 | 0 | 0 | 0 | 0 |
| 1779546585 | 3.81 | 0 | 0 | 0 | 0 |
| 1779545682 | 3.83 | 0 | 0 | 0 | 0 |
| 1779544778 | 3.84 | 0 | 0 | 0 | 0 |
| 1779543875 | 3.85 | 0 | 0 | 0 | 0 |
| 1779542972 | 3.86 | 0 | 0 | 0 | 0 |
| 1779542069 | 3.87 | 0 | 0 | 0 | 0 |
| 1779541166 | 3.89 | 0 | 0 | 0 | 0 |
| 1779540648 | 3.89 | 0 | 0 | 0 | 0 |
| 1779540015 | 3.91 | 0 | 0 | 0 | 0 |
| 1779539112 | 3.92 | 0 | 0 | 0 | 0 |
| 1779539088 | 3.92 | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)